DOGAMI OPEN-FILE REPORT SERIES

[Go back] | Publications Center | DOGAMI Home

PUBLICATION PREVIEW

 Open-File Report O-21-07, Natural hazard risk report for Wasco County, Oregon, including the Cities of Antelope, Dufur, Maupin, Mosier, Shaniko, The Dalles, and unincorporated Communities of Chenoweth, Tygh Valley, Pine Hollow, and The Warm Springs Reservation,
by Matt C. Williams and Ian P. Madin; 77 p. report, 6 tabloid size map plates, one Esri® geodatabase with internal metadata, external metadata in .xml format.

What's in this report?
This report describes the methods and results of a natural hazard risk assessment for Wasco County communities. The risk assessment can help communities better plan for disaster.

View Story Map

Report downloads:

EXECUTIVE SUMMARY

This report was prepared for the communities of Wasco County, Oregon, with funding provided by the Federal Emergency Management Agency (FEMA). It describes the methods and results of the natural hazard risk assessment performed in 2018 and 2021 by the Oregon Department of Geology and Mineral Industries (DOGAMI) within the study area. The purpose of this project was to provide communities with a detailed understanding of their risk from natural hazards, to give communities the ability to compare their risk across multiple hazards, and to prioritize and take actions that will reduce risk. The results of this study can also inform the natural hazard mitigation planning process.

We arrived at our findings and conclusions by completing three main tasks: compiling an asset database, identifying and using best available hazard data, and performing natural hazard risk assessment.

To complete the first task, we created a comprehensive asset database for the entire study area by synthesizing assessor data, U.S. Census information, Hazus-MH general building stock information, and building footprint data. This work resulted in a single dataset of building points and their associated building characteristics. Using this dataset, we were able to represent accurate spatial location and vulnerability on a building-by-building basis.

The second task was to identify and use the most current and appropriate hazard datasets for the study area. Most of the hazard datasets used in this report were created by DOGAMI and some were produced using high-resolution lidar topographic data. While not all the data sources used in the report are countywide, each hazard dataset was the best available at the time the analysis was performed.

In the third task, we performed the risk assessment using Esri® ArcGIS Desktop® software. We used two risk assessment approaches: (1) estimated loss (in dollars) to buildings from flood (recurrence intervals) and earthquake scenarios using FEMA Hazus®-MH methodology, and (2) calculated number of buildings, their value, and associated populations exposed to earthquake, flood, landslide, and wildfire hazards.

The findings and conclusions of this report show the potential impacts of hazards in communities within Wasco County. An earthquake can cause moderate damage and losses throughout the county. Hazus-MH earthquake simulations illustrate the potential reduction in earthquake damage through seismic retrofits. Some communities in the study area have moderate risk from flooding, and we quantify the number of elevated structures that are less vulnerable to flood hazard. Our analysis shows that new landslide mapping based on improved methods and lidar information will increase the accuracy of future risk assessments. During the time of writing, the best available data show that wildfire risk is very high for the overall study area. Our findings also indicate that most of the critical facilities in the study area are at high risk from earthquake and wildfire hazards. We also found that the biggest causes of population displacement are wildfire and landslide hazards. Lastly, we demonstrate that this risk assessment can be a valuable tool to local decisionmakers.

Results were broken out for the following geographic areas:

 

 

 

 

 

 

 

Selected Study Area Results
Total buildings: 18,481
Total estimated building value: $3.9 billion

2,500-year Probabilistic Magnitude 7.0 Earthquake
Red-tagged buildingsa: 1,104
Yellow-tagged buildingsb: 2,118
Loss estimate: $870 million

100-year Flood Scenario
Number of buildings damaged: 560
Loss estimate: $20 million

Landslide Exposure (High and Very High Susceptibility)
Number of buildings exposed: 3,013
Exposed building value: $499 million

Wildfire Exposure (High Risk)
Number of buildings exposed: 4,057
Exposed building value: $694 million

aRed-tagged buildings are considered to be uninhabitable due to complete damage.
bYellow-tagged buildings are considered to be of limited habitability due to extensive damage.

 


GEOGRAPHIC INFORMATION SYSTEM (GIS) DATA

Geodatabase is Esri® version 10.2 format.
Metadata is embedded in the geodatabase and is also provided as separate .xml formatted files.

Each dataset listed below has an associated, standalone .xml file containing metadata in the Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata format.

Sherman_County_Risk_Report_Data.gdb:

Feature dataset: Asset_Data:

 

 

Building_footprints

polygons

.xml

Communities

polygons

.xml

UDF_points

points

.xml


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

APPENDIX E: MAP PLATES (PDFs, 17 x 11 inches each)

Plate 1, Building Distribution Map of Wasco County, Oregon (6.4 MB PDF)

 

 

 

 

 

 

 

 

 

 

 

Plate 2, Population Density Map of Wasco County, Oregon (6 MB PDF)

 

 

 

 

 

 

 

 

 

 

 

 

Plate 3, CSZ Mw 9.0 Earthquake Shaking Map of Wasco County, Oregon (6 MB PDF)

 

 

 

 

 

 

 

 

 

 

 

 

Plate 4, Flood Hazard Map of Wasco County, Oregon  (6.8 MB PDF)

 

 

 

 

 

 

 

 

 

 

 

 

Plate 5, Landslide Susceptibility Map of Wasco County, Oregon (9 MB PDF)

 

 

 

 

 

 

 

 

 

 

 

 

Plate 6, Wildfire Hazard Map of Wasco County, Oregon (7 MB PDF)